Top » Catalog » Devices » OCB


Smart Tweezers Offset Calibration Board

The Smart Tweezers Offset Calibration Board is a dummy PCB with holes placed at variable width to represent many different component sizes (0201, 0402, etc.). When Smart Tweezers or Colibri is set to 10kHz and the tips are placed at the minimum distance in the respective holes to the size of component being measured, the device will show the actual offset capacitance. This value then should be subtracted from the component's measured value for higher accuracy measurements.

Previously, the offset value had to be determined by holding the tips of the device at roughly the same width as the components leads. This lead to inaccurate measurements.

When using the Smart Tweezers devices, the Offset Subtraction value can be set using the Smart Tweezers Offset Calibration Board.

Worldwide Distributors

Buy Online

Quick Find
Use keywords to find the product you are looking for.
Advanced Search
We Accept
24 x European Power Outlet Adapter
28 x LCR-Reader Ring Coil Tester
46 x LCR-Reader Pro Plus
23 x Smart Tweezers/LCR-Reader Connector PCB
41 x LCR-Reader-MPA BT: Bluetooth (Black)
36 x LCR-Reader-MPAL Low Frequency
17 x LCR-Reader Task Kit with Extra Tips, Bent Tips and Charger
27 x ST2/STIC Housing
22 x OLED Screen for Smart Tweezers and LCR-Reader
5 x ST-5S Task Kit with Spare Tips and Battery
7 x LCR-Reader Task Kit with Precision Tips
6 x LCR-Reader/ST-5S USB Charger
5 x LCR-Reader Task Kit with Spare Tips
3 x ST-5S Task Kit with Spare Tips, Bent Tips and Battery
10 x LCR-Reader Professional
12 x LCR-Reader Colibri
10 x LCR-Reader Rechargeable Li-Ion Battery
3 x LCR-Reader Task Kit with Spare Tips and Bent Tips
4 x ST-3 Disposable Batteries (Pack of 10)
4 x MicroTec Pro Annual Fee
5 x MicroTec-4.24 Professional version
6 x LCR-Reader Colibri Pro
5 x Fine Pin Probe for Probe Connector
8 x Tweezer Arms
2 x MicroTec Student Annual Fee
4 x Smart LED Test Tweezers
12 x Smart Tweezers ST5S-BT with Bluetooth and Receiver Stick
4 x Smart Tweezers Offset Calibration Board
3 x LCR-Reader Task Kit with Precision Tips and Bent Tips
8 x LCR-Reader-MPA Pro Grey
10 x Extra-Fine Pin Probe for Probe Connector
5 x MicroTec-4.24 Academic Version*
8 x LCR-Reader-MPA (black display)
5 x LCR-Reader Task Kit with Bent Tips
6 x LCR-Reader-MPA (grey display)
7 x LCR-Reader
7 x ST-3 Rechargeable NiMH Battery
7 x ST-5/ST-5S/LCR-Reader Spare Tips Bent
7 x MicroTec 4.24 Student version 4-month License*
9 x ST-5S Rechargeable Li-Ion Battery
8 x Smart Tweezers ST-5S
2 x MicroTec Academic Annual Fee
3 x MicroTec-4.24 Student version*
6 x ST-5S Task Kit with Spare Tips and Bent Tips
4 x ST-5S Task Kit with Spare Tips
1 x ST-5S Task Kit with Precision and Bent Tips
8 x ST-5S Task Kit with Bent Tips and Battery
3 x LCR-Reader/Smart Tweezers ST-5S Carrying Case
1 x ST-3/ST-5 Carrying Case
5 x ST-5/ST-5S Spare Tips Straight
2 x Flex Cable
5 x Smart Tweezers ST-5S Pro
2 x ST5S LCD Screen
2 x Smart Tweezers ST-3 Replacement Tips Straight
2 x Bottom Housing Case
2 x LCR-Reader Spare Tweezer Tips
1 x ST-5S Task Kit with Precision Tips, Bent Tips, and Battery
Share Product
Share on Digg Share via E-Mail
Share on Facebook
Share on Twitter