Smart Tweezers Offset Calibration Board

0Reviews | Write Review


The Smart Tweezers Offset Calibration Board is a dummy PCB with holes placed at various distances representing different component sizes (0201, 0402, etc.). When Smart Tweezers or Colibri is set to 10kHz and the tips are placed at the minimum distance in the respective holes for the size of component being measured, the device will show the actual offset capacitance. This value then should be subtracted from the component's measured value for higher accuracy measurements.

For later models, such as LCR-Reader-MPA and R2, the Open Calibration is done by pushing the joystick to the right for 2 beeps.

When using the Smart Tweezers devices, the Offset Subtraction value can be set using the Smart Tweezers Offset Calibration Board.

Worldwide Distributors

Buy Online